{"product_id":"digital-product","title":"Digital STL \u0026 3MF – Premium 12x12x18 PVC Enclosure Stacking Riser System","description":"\u003ch3\u003eDIGITAL DOWNLOAD ONLY — NO PHYSICAL PRODUCT WILL BE SHIPPED\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePERSONAL USE LICENSE ONLY — Commercial printing, resale of physical products, and redistribution of these digital files are prohibited.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTurn your 12x12x18 PVC enclosures into a clean, organized vertical setup with the \u003cstrong\u003eHatch \u0026amp; Habitat Premium PVC Enclosure Stacking Riser System\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThis full-frame riser system was designed to allow compatible \u003cstrong\u003e12x12x18 PVC reptile enclosures to be stacked vertically while maintaining approximately 78 mm of usable space between the enclosures\u003c\/strong\u003e for lighting, wiring, cables, misting lines, ventilation, and other husbandry equipment.\u003c\/p\u003e\n\u003cp\u003eUnlike simple corner feet or small spacers, this premium system uses \u003cstrong\u003efour structural corner sections connected by upper and lower perimeter rails\u003c\/strong\u003e, creating a more complete support structure around the enclosure.\u003c\/p\u003e\n\u003cp\u003eIt is designed for keepers and breeders who want to make better use of vertical space without giving up access to the equipment normally positioned above an enclosure.\u003c\/p\u003e\n\u003ch3\u003eIMPORTANT — MINIMUM PRINTER SIZE\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThis design requires a printer with a minimum 256 × 256 mm build plate.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe included print project and individual components are designed for \u003cstrong\u003e256 × 256 mm-class printers or larger\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinters with a smaller build area are not supported for this product.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe longest individual components measure approximately \u003cstrong\u003e223.6 mm\u003c\/strong\u003e, allowing them to fit on common 256 × 256 mm printers such as the Bambu Lab A1.\u003c\/p\u003e\n\u003cp\u003eThe completely assembled system measures approximately:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e300 mm × 300 mm × 78 mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBecause the completed assembly is larger than a 256 × 256 mm print bed, the assembled STL is provided primarily as a \u003cstrong\u003ereference model\u003c\/strong\u003e. The system should be printed using the individual components or the included multi-plate 3MF project.\u003c\/p\u003e\n\u003ch3\u003ePremium Full-Frame Design\u003c\/h3\u003e\n\u003cp\u003eThe completed system surrounds the enclosure with upper and lower structural rails rather than relying entirely on isolated feet.\u003c\/p\u003e\n\u003cp\u003eThis creates a more complete stacking platform while leaving the center open for equipment.\u003c\/p\u003e\n\u003cp\u003eThe space between stacked enclosures can accommodate items such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLED lighting\u003c\/li\u003e\n\u003cli\u003eAppropriate UVB fixtures\u003c\/li\u003e\n\u003cli\u003eElectrical wiring\u003c\/li\u003e\n\u003cli\u003ePower cables\u003c\/li\u003e\n\u003cli\u003eMisting tubing\u003c\/li\u003e\n\u003cli\u003eSensors and probes\u003c\/li\u003e\n\u003cli\u003eOther enclosure equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis makes the system particularly useful for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBreeding rooms\u003c\/li\u003e\n\u003cli\u003eMulti-enclosure displays\u003c\/li\u003e\n\u003cli\u003eGecko setups\u003c\/li\u003e\n\u003cli\u003eDart frog setups\u003c\/li\u003e\n\u003cli\u003eReptile rooms\u003c\/li\u003e\n\u003cli\u003eLimited shelf space\u003c\/li\u003e\n\u003cli\u003eOther multi-enclosure installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eModular 12-Piece Assembly\u003c\/h3\u003e\n\u003cp\u003eThe complete system uses \u003cstrong\u003e12 printed components\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 corner sections\u003c\/li\u003e\n\u003cli\u003e1 front upper rail\u003c\/li\u003e\n\u003cli\u003e1 front lower rail\u003c\/li\u003e\n\u003cli\u003e1 rear upper rail\u003c\/li\u003e\n\u003cli\u003e1 rear lower rail\u003c\/li\u003e\n\u003cli\u003e2 side upper rails\u003c\/li\u003e\n\u003cli\u003e2 side lower rails\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBreaking the approximately 300 × 300 mm completed frame into individual components allows the system to be produced on a \u003cstrong\u003e256 × 256 mm printer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eRecommended Material: PETG\u003c\/h2\u003e\n\u003cp\u003eWe recommend printing the system in \u003cstrong\u003ePETG\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003ePETG was selected because of its combination of:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eToughness\u003c\/li\u003e\n\u003cli\u003eGood layer durability\u003c\/li\u003e\n\u003cli\u003eMoisture resistance\u003c\/li\u003e\n\u003cli\u003eBetter temperature resistance than standard PLA\u003c\/li\u003e\n\u003cli\u003eSlight flexibility compared with more brittle materials\u003c\/li\u003e\n\u003cli\u003eSuitability for humid reptile and amphibian environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe components are designed to print \u003cstrong\u003ewithout supports when correctly oriented\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eRecommended 0.6 mm Nozzle Settings\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003e0.6 mm nozzle is our preferred production setup\u003c\/strong\u003e for this design because it provides an excellent balance of strength, print time, and material efficiency.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNozzle:\u003c\/strong\u003e 0.6 mm\u003cbr\u003e\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.36 mm\u003cbr\u003e\u003cstrong\u003eWall Loops:\u003c\/strong\u003e 3\u003cbr\u003e\u003cstrong\u003eInfill:\u003c\/strong\u003e 15% Rectilinear\u003cbr\u003e\u003cstrong\u003eTop Layers:\u003c\/strong\u003e 3\u003cbr\u003e\u003cstrong\u003eBottom Layers:\u003c\/strong\u003e 3\u003cbr\u003e\u003cstrong\u003eSupports:\u003c\/strong\u003e OFF\u003cbr\u003e\u003cstrong\u003eTypical Line Width:\u003c\/strong\u003e 0.62–0.66 mm\u003cbr\u003e\u003cstrong\u003ePETG Nozzle Temperature:\u003c\/strong\u003e approximately 245–255°C, or your filament manufacturer's recommendation\u003cbr\u003e\u003cstrong\u003eBed Temperature:\u003c\/strong\u003e approximately 75–80°C\u003c\/p\u003e\n\u003ch2\u003eRecommended 0.4 mm Nozzle Settings\u003c\/h2\u003e\n\u003cp\u003eFor printers equipped with a standard 0.4 mm hotend:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNozzle:\u003c\/strong\u003e 0.4 mm\u003cbr\u003e\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.28 mm\u003cbr\u003e\u003cstrong\u003eWall Loops:\u003c\/strong\u003e 4\u003cbr\u003e\u003cstrong\u003eInfill:\u003c\/strong\u003e 20% Rectilinear\u003cbr\u003e\u003cstrong\u003eTop Layers:\u003c\/strong\u003e 4\u003cbr\u003e\u003cstrong\u003eBottom Layers:\u003c\/strong\u003e 4\u003cbr\u003e\u003cstrong\u003eSupports:\u003c\/strong\u003e OFF\u003cbr\u003e\u003cstrong\u003eTypical Line Width:\u003c\/strong\u003e 0.42–0.45 mm\u003cbr\u003e\u003cstrong\u003ePETG Nozzle Temperature:\u003c\/strong\u003e approximately 245–255°C, or your filament manufacturer's recommendation\u003cbr\u003e\u003cstrong\u003eBed Temperature:\u003c\/strong\u003e approximately 75–80°C\u003c\/p\u003e\n\u003cp\u003eA complete PETG print-settings guide covering cooling, speeds, adhesion, orientation, slicing recommendations, and final inspection is included with the download.\u003c\/p\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003eYour digital package includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOriginal multi-plate \u003cstrong\u003e3MF print project\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndividual printable \u003cstrong\u003eSTL component files\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFully assembled \u003cstrong\u003ereference STL\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompleted-product reference image\u003c\/li\u003e\n\u003cli\u003ePETG print-settings guide for \u003cstrong\u003e0.4 mm and 0.6 mm nozzles\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eREADME with component quantities and printer requirements\u003c\/li\u003e\n\u003cli\u003eHatch \u0026amp; Habitat \u003cstrong\u003ePersonal Use License\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Note About the Assembled STL\u003c\/h3\u003e\n\u003cp\u003eThe assembled STL is included to show the completed geometry and assist with assembly\/reference.\u003c\/p\u003e\n\u003cp\u003eAt approximately \u003cstrong\u003e300 × 300 mm\u003c\/strong\u003e, it is larger than the build area of most 256 × 256 mm hobby printers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo not attempt to print the assembled reference file as one piece unless your printer has a sufficiently large build area.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse the supplied individual components or multi-plate 3MF project for normal printing.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis system was developed for the Hatch \u0026amp; Habitat \u003cstrong\u003e12x12x18 PVC enclosure stacking application\u003c\/strong\u003e, using an approximately \u003cstrong\u003e300 × 300 mm enclosure footprint\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003ePlease note that \u003cstrong\u003e12x12x18 is a nominal enclosure size\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eActual exterior dimensions, wall thicknesses, trim geometry, and construction methods can vary between enclosure manufacturers and even between production revisions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVerify your enclosure dimensions and geometry before purchasing and printing.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHatch \u0026amp; Habitat cannot guarantee compatibility with every enclosure marketed as 12x12x18.\u003c\/p\u003e\n\u003ch2\u003eSafety \u0026amp; Final Inspection\u003c\/h2\u003e\n\u003cp\u003eBefore stacking enclosures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDry-fit the entire riser system\u003c\/li\u003e\n\u003cli\u003eConfirm that all components seat fully\u003c\/li\u003e\n\u003cli\u003eInspect every printed piece for cracks, warping, under-extrusion, or poor layer adhesion\u003c\/li\u003e\n\u003cli\u003ePlace the system only on a stable, level surface\u003c\/li\u003e\n\u003cli\u003eConfirm that the upper enclosure sits securely\u003c\/li\u003e\n\u003cli\u003eMake sure wires and lighting are not pinched\u003c\/li\u003e\n\u003cli\u003eDo not allow cables, lights, or other equipment to carry structural weight\u003c\/li\u003e\n\u003cli\u003eVerify the complete setup before placing animals inside either enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe strength and quality of a finished 3D print depend on the printer, filament, slicer settings, calibration, print orientation, and user assembly.\u003c\/p\u003e\n\u003ch2\u003ePersonal Use License — No Commercial Use\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThis digital product is licensed for personal use only.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePurchase grants the original buyer permission to print the design for their own personal enclosure setups.\u003c\/p\u003e\n\u003cp\u003eYou may \u003cstrong\u003enot\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSell physical prints produced from these files\u003c\/li\u003e\n\u003cli\u003eManufacture these risers commercially\u003c\/li\u003e\n\u003cli\u003eUse the design as part of a commercial 3D-printing service\u003c\/li\u003e\n\u003cli\u003eResell the digital files\u003c\/li\u003e\n\u003cli\u003eRedistribute or share the files\u003c\/li\u003e\n\u003cli\u003eUpload the files to another website, marketplace, repository, or file-sharing service\u003c\/li\u003e\n\u003cli\u003eTrade or give away copies of the files\u003c\/li\u003e\n\u003cli\u003eSell or distribute modified versions of the design\u003c\/li\u003e\n\u003cli\u003eIncorporate the design, in whole or in part, into another product intended for commercial sale\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePurchase of these files \u003cstrong\u003edoes not transfer ownership, copyright, or commercial manufacturing rights\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eAll design rights remain with \u003cstrong\u003eHatch \u0026amp; Habitat\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eCommercial manufacturing or resale of physical products made from these files is prohibited unless \u003cstrong\u003eseparate written commercial authorization is provided by Hatch \u0026amp; Habitat\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePremium full-frame support. Space for your equipment. Better use of vertical enclosure space.\u003c\/strong\u003e\u003c\/p\u003e","brand":"HatchAndHabitat","offers":[{"title":"Default Title","offer_id":45516013076503,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/9987\/4583\/files\/IMG_8707.jpg?v=1789406467","url":"https:\/\/hatchandhabitat.com\/products\/digital-product","provider":"HatchAndHabitat","version":"1.0","type":"link"}