Digital STL & 3MF – Premium 12x12x18 PVC Enclosure Stacking Riser System
DIGITAL DOWNLOAD ONLY — NO PHYSICAL PRODUCT WILL BE SHIPPED
PERSONAL USE LICENSE ONLY — Commercial printing, resale of physical products, and redistribution of these digital files are prohibited.
Turn your 12x12x18 PVC enclosures into a clean, organized vertical setup with the Hatch & Habitat Premium PVC Enclosure Stacking Riser System.
This full-frame riser system was designed to allow compatible 12x12x18 PVC reptile enclosures to be stacked vertically while maintaining approximately 78 mm of usable space between the enclosures for lighting, wiring, cables, misting lines, ventilation, and other husbandry equipment.
Unlike simple corner feet or small spacers, this premium system uses four structural corner sections connected by upper and lower perimeter rails, creating a more complete support structure around the enclosure.
It is designed for keepers and breeders who want to make better use of vertical space without giving up access to the equipment normally positioned above an enclosure.
IMPORTANT — MINIMUM PRINTER SIZE
This design requires a printer with a minimum 256 × 256 mm build plate.
The included print project and individual components are designed for 256 × 256 mm-class printers or larger.
Printers with a smaller build area are not supported for this product.
The longest individual components measure approximately 223.6 mm, allowing them to fit on common 256 × 256 mm printers such as the Bambu Lab A1.
The completely assembled system measures approximately:
300 mm × 300 mm × 78 mm
Because the completed assembly is larger than a 256 × 256 mm print bed, the assembled STL is provided primarily as a reference model. The system should be printed using the individual components or the included multi-plate 3MF project.
Premium Full-Frame Design
The completed system surrounds the enclosure with upper and lower structural rails rather than relying entirely on isolated feet.
This creates a more complete stacking platform while leaving the center open for equipment.
The space between stacked enclosures can accommodate items such as:
- LED lighting
- Appropriate UVB fixtures
- Electrical wiring
- Power cables
- Misting tubing
- Sensors and probes
- Other enclosure equipment
This makes the system particularly useful for:
- Breeding rooms
- Multi-enclosure displays
- Gecko setups
- Dart frog setups
- Reptile rooms
- Limited shelf space
- Other multi-enclosure installations
Modular 12-Piece Assembly
The complete system uses 12 printed components:
- 4 corner sections
- 1 front upper rail
- 1 front lower rail
- 1 rear upper rail
- 1 rear lower rail
- 2 side upper rails
- 2 side lower rails
Breaking the approximately 300 × 300 mm completed frame into individual components allows the system to be produced on a 256 × 256 mm printer.
Recommended Material: PETG
We recommend printing the system in PETG.
PETG was selected because of its combination of:
- Toughness
- Good layer durability
- Moisture resistance
- Better temperature resistance than standard PLA
- Slight flexibility compared with more brittle materials
- Suitability for humid reptile and amphibian environments
The components are designed to print without supports when correctly oriented.
Recommended 0.6 mm Nozzle Settings
The 0.6 mm nozzle is our preferred production setup for this design because it provides an excellent balance of strength, print time, and material efficiency.
Nozzle: 0.6 mm
Layer Height: 0.36 mm
Wall Loops: 3
Infill: 15% Rectilinear
Top Layers: 3
Bottom Layers: 3
Supports: OFF
Typical Line Width: 0.62–0.66 mm
PETG Nozzle Temperature: approximately 245–255°C, or your filament manufacturer's recommendation
Bed Temperature: approximately 75–80°C
Recommended 0.4 mm Nozzle Settings
For printers equipped with a standard 0.4 mm hotend:
Nozzle: 0.4 mm
Layer Height: 0.28 mm
Wall Loops: 4
Infill: 20% Rectilinear
Top Layers: 4
Bottom Layers: 4
Supports: OFF
Typical Line Width: 0.42–0.45 mm
PETG Nozzle Temperature: approximately 245–255°C, or your filament manufacturer's recommendation
Bed Temperature: approximately 75–80°C
A complete PETG print-settings guide covering cooling, speeds, adhesion, orientation, slicing recommendations, and final inspection is included with the download.
What's Included
Your digital package includes:
- Original multi-plate 3MF print project
- Individual printable STL component files
- Fully assembled reference STL
- Completed-product reference image
- PETG print-settings guide for 0.4 mm and 0.6 mm nozzles
- README with component quantities and printer requirements
- Hatch & Habitat Personal Use License
Important Note About the Assembled STL
The assembled STL is included to show the completed geometry and assist with assembly/reference.
At approximately 300 × 300 mm, it is larger than the build area of most 256 × 256 mm hobby printers.
Do not attempt to print the assembled reference file as one piece unless your printer has a sufficiently large build area.
Use the supplied individual components or multi-plate 3MF project for normal printing.
Compatibility
This system was developed for the Hatch & Habitat 12x12x18 PVC enclosure stacking application, using an approximately 300 × 300 mm enclosure footprint.
Please note that 12x12x18 is a nominal enclosure size.
Actual exterior dimensions, wall thicknesses, trim geometry, and construction methods can vary between enclosure manufacturers and even between production revisions.
Verify your enclosure dimensions and geometry before purchasing and printing.
Hatch & Habitat cannot guarantee compatibility with every enclosure marketed as 12x12x18.
Safety & Final Inspection
Before stacking enclosures:
- Dry-fit the entire riser system
- Confirm that all components seat fully
- Inspect every printed piece for cracks, warping, under-extrusion, or poor layer adhesion
- Place the system only on a stable, level surface
- Confirm that the upper enclosure sits securely
- Make sure wires and lighting are not pinched
- Do not allow cables, lights, or other equipment to carry structural weight
- Verify the complete setup before placing animals inside either enclosure
The strength and quality of a finished 3D print depend on the printer, filament, slicer settings, calibration, print orientation, and user assembly.
Personal Use License — No Commercial Use
This digital product is licensed for personal use only.
Purchase grants the original buyer permission to print the design for their own personal enclosure setups.
You may not:
- Sell physical prints produced from these files
- Manufacture these risers commercially
- Use the design as part of a commercial 3D-printing service
- Resell the digital files
- Redistribute or share the files
- Upload the files to another website, marketplace, repository, or file-sharing service
- Trade or give away copies of the files
- Sell or distribute modified versions of the design
- Incorporate the design, in whole or in part, into another product intended for commercial sale
Purchase of these files does not transfer ownership, copyright, or commercial manufacturing rights.
All design rights remain with Hatch & Habitat.
Commercial manufacturing or resale of physical products made from these files is prohibited unless separate written commercial authorization is provided by Hatch & Habitat.
Premium full-frame support. Space for your equipment. Better use of vertical enclosure space.