PB7 Blemished 12x12x18 PVC Enclosure Riser Set
A fully functional set of Hatch & Habitat stacking risers for 12x12x18 PVC enclosures at a heavily reduced price.
PB7 includes complete riser sets that were produced during refinement of our PVC enclosure stacking system. The individual risers are fully usable and fit their intended enclosure, but the front risers are slightly wider than the rear risers, creating a small visual mismatch within the set.
Once installed underneath an enclosure, the difference is very difficult to notice during normal use and does not prevent the risers from performing their intended function.
Rather than discard fully functional PETG parts simply because the dimensions are not cosmetically consistent with one another, we're offering these sets through our Prototype & Blemish Sale for just $10 each.
What's Included
- 1 complete riser set — risers for all 4 corners
- Designed for compatible 12x12x18 PVC enclosures
- 2 front risers
- 2 rear risers
- Printed in durable PETG
- $10 per complete set
Why Is PB7 Discounted?
The front and rear risers in these sets were produced from slightly different revisions of the design.
As a result, the front risers are wider than the rear risers.
They remain compatible as a complete set and are fully functional, but the difference means they don't meet the visual consistency standard we require for our regular production products.
Once the risers are installed underneath the enclosure, however, the size difference is extremely subtle and difficult to see.
Individual pieces may also have minor cosmetic imperfections associated with 3D printing.
Built for Stacking PVC Enclosures
PB7 was designed for compatible 12x12x18 PVC enclosures, creating a supported gap between stacked habitats.
That additional clearance can provide space for:
- LED lighting
- UVB fixtures
- Wiring and cables
- Ventilation
- Misting equipment
- General maintenance access
The risers fit around the enclosure corners and are designed to carry the enclosure through supported PETG geometry rather than relying on small standalone feet.
Fully Functional — Just Slightly Mismatched
The important distinction with PB7 is that these are not failed risers.
The front and rear pieces simply don't have identical exterior widths.
The fit and intended stacking function remain intact, making PB7 a great option for anyone who prioritizes function over having four visually identical pieces.
Once installed, most of the riser geometry is tucked underneath the enclosure and the difference between the front and rear pieces becomes very difficult to notice.
Durable PETG Construction
The risers are printed in PETG, selected for its combination of:
- Toughness and impact resistance
- Moisture resistance
- Better temperature resistance than standard PLA
- Durability in humid reptile and amphibian environments
- Strong performance when loads are carried through supported geometry
These use the same type of durable material chosen for our regular enclosure-accessory products.
Availability
6 complete PB7 riser sets available
$10.00 per complete 4-corner set
Once these mismatched sets are sold, this particular configuration will not be reproduced.
Prototype & Blemish Sale Disclaimer
Please read before purchasing: This item is sold as a Prototype and/or Blemished product and may not reflect the dimensions, cosmetic consistency, or finish of our current full-price production version.
For PB7 specifically, the front risers are wider than the rear risers because the pieces were produced from slightly different revisions of the design. This difference is primarily cosmetic and is difficult to notice once the risers are installed underneath the enclosure.
Products may also show visible layer lines, rough or uneven surfaces, seams, stringing, small blobs, minor cosmetic irregularities, or other imperfections associated with the 3D-printing and development process.
The photos shown in the product description are intended to demonstrate the actual style of product and some of the common variations or blemishes you may receive. Because each set is different, the exact location, type, and severity of cosmetic imperfections may vary from the items pictured.
All included risers have been retained because they are considered fully functional for their intended use despite their cosmetic mismatch or minor imperfections.
Prototype & Blemish products are offered at a reduced price so usable PETG prints can be put to use rather than becoming unnecessary plastic waste.
By purchasing from the Prototype & Blemish Sale, you acknowledge that the front and rear risers will differ slightly in width and cosmetic appearance may vary between sets.